The heating season is the best time to measure radon – indoor radon levels are usually at their highest during this period

 (0)

 

Radon measurements for your home

 

Measure radon reliably andwithout intervening in your living space. Here you can read which measurement is right for you, how it works, what the result means and how we reduce radon if there is too much of it.

 

Order a long-term measurement

Rent a monitor

 

Not sure which measurement is right for you? Call +386 31 733 276. A short consultation is free.

 

 

Which measurement is right for you?

 

Choose according to what you need. Each suggestion leads you to the details below.

 

Your situation and Recommendation

 

You are measuring radon for the first time and want a reliable result. – Long-term measurement: 2 Radtrak³® detectors for at least 3 months.

 

You are buying or selling a property and time is short. –  Quick screening test with a RadonEye monitor (14 days), and a long-term measurement after the purchase.

 

 

The quick test showed elevated values. – Long-term measurement, which is the basis for deciding on remediation.

 

You are renovating, replacing windows or have had the house energy-renovated. – Long-term measurement after the work is finished.

 

You have just carried out remediation. – Follow-up long-term measurement within a year and, if needed, your own monitor for ongoing tracking.

 

You want to monitor radon continuously. – Your own digital monitor. We recommend RadonEye.

 

 

Long-term measurement with Radtrak³® detectors

 

A reliable estimate of the average annual radon concentration and the basis for deciding on measures. The detectors are analysed by the Radonova laboratory, accredited under ISO/IEC 17025.

 

    1. Order the detectors, at least 2 for a home. We send them to you with instructions and a return envelope.

 

    2. Place the detectors as instructed, one in the bedroom and one in the living room, and record the start date and the location on the Radonova laboratory's online portal or on the enclosed form.

 

    3. Leave the detectors in the same place for 2–3 months or more, ideally during the heating season. Live as usual during the measurement.

 

    4. At the end, record the end date and send the detectors to the RadonBlue company address on the same day.

 

    5. The laboratory analyses the detectors immediately on receipt. You receive the result in an online report, and we explain it to you and advise on the next steps.

 

 

Why do we recommend two detectors for a home?

 

  • Radon is not evenly distributed. Even neighbouring rooms can have quite different values.

 

  • We measure where you are most exposed. We spend about a third of the day in the bedroom, and a large part of the remaining time in the living room.

 

  • Less risk of a wrong result. If one detector is placed unfavourably or gets moved, the other shows whether the result makes sense.

 

  • A better basis for measures. If one room stands out, it is easier to find where radon enters the house.

 

  • A small cost for an important decision. An extra detector costs €42, while remediation costs anywhere from nothing to several thousand euros.

 

If you live on several floors or spend a lot of time in a room in the basement or on the ground floor (e.g. a child's room or a study), add a detector there too.

 

€42 per detector

Home package (2 detectors): €84

Order detectors

 

 

Quick screening test with a RadonEye monitor

 

When you need a quick answer: before buying or selling a property, for a first look, or to check the effect of measures. The monitor measures continuously and shows how radon changes during the day, at night and when you ventilate.

 

    1. We ship the monitor to you, or you collect it in person at the company's address.

 

    2. Place it in the living space where you spend the most time, ideally on the lowest occupied floor, and plug it in. Do not place it in the kitchen or bathroom, or next to a window or a heater.

 

    3. It shows the first values after just 10 minutes; in the first few hours they are still settling. Do not move the monitor during the measurement.

 

    4. After 14 days you return it within 3 working days, and we explain the results and advise on the next steps.

 

€40 rental

+ €150 refundable deposit

Rent a monitor

 

 

Are you buying a property?

 

Measuring radon before buying makes sense: elevated values can be an argument in negotiations about the price or about remediation. Since there is usually little time before the contract is signed, the quick test is suitable for this.

 

The quick test is a screening (indicative) measurement. Because radon changes with the weather and the season, we recommend a long-term measurement if values are elevated, before remediation.

 

€40 rental

+ €150 refundable deposit

Rent a monitor

 

 

Your own monitor for continuous monitoring

 

Your own monitor makes sense if you want to track radon over a longer period, for example after remediation or in a building where values fluctuate strongly. It shows current values and the long-term average.

Our recommendation is RadonEye.

We use RadonEye ourselves for quick tests. It shows the first values after just 10 minutes, and on the screen and in the app (via Bluetooth) you can see trends and the long-term average.

 

from €198

Choose a monitor

 

 

What does your result mean?

 

The ranges apply to the average of a long-term measurement; the result of a quick test is only an estimate.

 

below 100 Bq/m³ – Low level, below the World Health Organization's recommendation. No measures are needed. Repeat the measurement after a major renovation.

 

100–300 Bq/m³ – Below the EU reference level, but above the WHO recommendation. Measures are generally not needed; regular ventilation can lower the level further.

 

300–400 Bq/m³ – Slightly above the reference level. Regular ventilation is often enough, especially in rooms where you do not spend much time.

 

400–1000 Bq/m³ – Elevated level. We find and seal the entry points: shafts, cracks, drains.

 

above 1000 Bq/m³ – High level. The most effective measure is extracting air from beneath the foundation slab. Act as soon as possible.

 

The ranges are indicative; we always adapt the measures to your building. The reference level in Slovenia is 300 Bq/m³, and the World Health Organization recommends 100 Bq/m³.

 

Book a consultation

 

 

How do we reduce radon?

 

Almost every home with too much radon can be remediated. Costs depend on the building and the concentration, from nothing to several thousand euros.

 

Ventilating rooms. When the reference level is exceeded only slightly, especially in rooms where we do not spend much time, regular ventilation may be enough: several times a day, open the windows wide for a few minutes. The effect is short-lived, and within a few hours the concentration can rise again.

 

Sealing entry points. If ventilation is not enough, we find where radon enters the building and seal those points. These are often shafts, larger cracks in the floor slab and drains that the owners know well.

 

Extracting air from beneath the foundation slab. At high concentrations this is the most effective measure and can reduce radon by more than 90%. One or more pipes carry the air from beneath the foundation slab to above the living spaces, either passively, by natural draft, or actively, with an energy-efficient fan. We reach the soil beneath the slab by drilling through the slab or from the outside of the house.

 

From our own experience: in our house the passive draft was not enough, and only with a fan did we achieve the right effect.

We plan the measures in line with Technical Guideline TSG-1-007:2023, Radon Protection in Buildings.

 

 

Building a new house or renovating?

 

By regulation, new buildings with living spaces must be designed and built so that the radon concentration in them does not exceed the reference level. The requirements for new buildings and for work on existing buildings are set by a special regulation, and the measures are summarised in Technical Guideline TSG-1-007:2023, Radon Protection in Buildings.

 

An energy renovation or window replacement can also increase the radon concentration, because the building becomes more airtight. We therefore recommend a measurement before the renovation and a long-term measurement after it.

 

At the consultation we also review the plans for a new build or renovation and propose how to include radon protection in the project from the start.

 

Book a consultation

 

 

 

1:1 advice from a radon expert

 

In a one-hour online consultation we review your measurements, the building plans, photos and videos, and propose specific measures.

 

  • Review of previous measurements: were they carried out correctly

 

  • Analysis of the building's plans, photos and videos

 

  • Specific recommendations for reducing radon: sealing, ventilation or air extraction

 

  • Advice on whether on-site diagnostics make sense, and the next step

 

 

Steps before consultation:

 

    1. Fill in the questionnaire about the building.

 

    2. Upload the plans, photos and videos to a folder to which we send you access.

 

    3. Choose a time slot. The consultation takes place in Microsoft Teams.

 

    4. In the one-hour consultation you receive clear instructions for action.

 

Book a consultation (1 hour) · on-site inspection by arrangement

 

 

 

After remediation: check that the measures work

 

Follow-up measurement within a year. Use a long-term measurement to check whether the measures have really reduced the radon concentration.

 

Continuous monitoring. With your own monitor you quickly notice if the measures lose their effect.

 

Repeat measurement every 5 years, and after any major renovation, for example after an energy renovation or window replacement.

 

Order a follow-up measurement

 

 

 

Frequently asked questions

 

How long does a radon measurement take?

A long-term measurement with Radtrak³® detectors takes at least 2 months; we recommend 3 or more. The quick screening test with a RadonEye monitor takes 14 days, and you see the first values after just 10 minutes.

 

How does the long-term measurement work?

For a home we recommend ordering at least 2 detectors. Place one in the bedroom and one in the living room, and record the start date and the placement location. After 3 months you return the detectors to the RadonBlue company address, Podlubnik 54, 4220 Škofja Loka. You receive the result in an online report.

 

Why two detectors and not one?

Because the radon concentration can differ greatly between rooms. Detectors in the bedroom and the living room cover the rooms where you spend the most time, check each other if one is placed unfavourably, and help find where radon enters. An extra detector costs €42, which is little compared with the decision on remediation.

 

Is the quick test officially valid?

No. The quick test is a screening (indicative) measurement that quickly shows whether radon is likely a problem. Because radon changes from day to day, we recommend a long-term measurement before deciding on remediation, and employers need a measurement by an authorised provider.

 

Can I measure long-term with my own monitor?

Yes. A digital monitor such as RadonEye measures continuously and also shows the long-term average, so it is excellent for ongoing monitoring, especially after remediation. The results are indicative; for a reliable and verifiable assessment we recommend an accredited long-term measurement.

 

Does it make sense to measure before buying a property?

Yes. Elevated values can be an argument in negotiations about the price or about remediation before the purchase. Since there is usually little time before the contract is signed, the quick screening test is suitable.

 

What if the values are elevated?

Don't worry: almost every home can be remediated. If the reference level is exceeded only slightly, regular ventilation and sealing of entry points often help; at higher values the most effective measure is extracting air from beneath the foundation slab, which can reduce the radon concentration by more than 90%. We find the most suitable measures together in an online consultation or during an on-site visit.

 

When is the best time to measure?

During the heating season, when the windows are mostly closed and radon concentrations in enclosed spaces are usually highest. The measurement then shows the least favourable situation.

 

In which room should I measure?

Where you spend the most time, ideally in the bedroom and the living room on the lowest occupied floor. Do not place detectors or the monitor in the kitchen or bathroom, or next to a window or a heater.

 

How often should I measure radon again?

Carry out a follow-up long-term measurement within a year of remediation. Then repeat the measurement every 5 years and after any major renovation, for example after an energy renovation or window replacement.

 

What are the most common mistakes in measuring?

Too few measuring points (at least 2 detectors for a home), wrong placement (next to a window or heater, in the kitchen or bathroom), and a measurement that is too short when you need a reliable assessment. With digital monitors, moving them between rooms too quickly: after a move, the monitor needs a few hours for the values to settle.

 

Can I have the measurement done for free?

In municipalities with more radon, the state may provide a limited number of measurements in private homes each year. With us you receive the detectors or the monitor by post within 2–3 working days, together with an explanation of the results and advice on the next steps.

 

 

Start with a measurement

 

The first and most important step is measurement. We help you choose the right one.

 

Order a long-term measurement

Rent a monitor

 

Or call +386 31 733 276. A short consultation is free.